Rockwell Automation 1398 H-Series Brushless Servo Motor Manual - Manual (Page 4)

Dimensional Data
Intro
SHAFT END PLAY UNDER LOAD SHAFT END THREADED HOLE
Maximum end play (All Motors)
Direction mm/in Motor Series Load (Kg/Lb) Motor Series Thread Thread/Depth
---> 0.025/0.001 H-2000/H-3000 4.54/10.0 H-2000 M3 x 0.5MM 10mm / 0.39in
H-4000 9.09/20.0 H-3000 M4 x 0.7MM
<--- 0.025/0.001 H-6000/H-8000 22.7/50 H-4000 M6 x 1.0MM 15mm / 0.59in
H-6000 M8 x 1.25MM 20mm / 0.79in
H-8000
Note: End play and load are measured in inches and pounds. Metric measurements
are approximate conversions from inches and pounds.
Note: Motors are manufactured to millimeter dimensions. Inch dimensions
are approximate conversions from millimeters.
AB
FEEDBACK CONNECTOR
SHAFT END THREADED HOLE
MOTOR CONNECTOR
L
BB
BE
XD
AH
EP
S
U
BF DIA HOLES ON
AJ BOLT CIRCLE
P
AK