Installation – Rockwell Automation 1397 60HP AC Line Disconnect Installation User Manual
Page 2
2
1397 60HP AC Line Disconnect
1397 – 5.11 March 1997
Installation
ATTENTION: Electric Shock can cause injury or death.
Remove all power before working on this product.
The drive is at line voltage when connected to incoming AC
power. Before proceeding with any installation or
troubleshooting activity, disconnect, lock out, and tag all
incoming power to the drive. Verify with a voltmeter that no
voltage exists at terminals L1, L2 and L3 on the drive input
power terminal block.
!
Mounting
Screw
181
182
183
AC Line
Connection
183
(L3)
182
(L2)
181
(L1)
Mounting
Screw
❏ 1 Remove and lock out all incoming power to the drive.
Disconnect AC line leads L1, L2
&
L3 at the top of the terminal
block.
Disconnect the three leads at the bottom of the fuse block.
Remove the (2) mounting screws to remove the terminal block
and attached leads.