Rockwell Automation Receiving, Handling, and Storing Industrial Control Panels - Manual (Page 5)

5
Receiving, Handling, and Storing Industrial Control Panels
Figure 2 Overhead lifting an industrial control panel with single lifting angle
Figure 3 Overhead lifting an industrial control panel with dual lifting angles
1/2 ‘A’ MIN.
‘A’
Never Exceed
45° Maximum
“Load Rated”
Hooks
“Lifting Angle”
1/2 ‘A’ MIN.
‘A’
Never Exceed
45° Maximum
“Load Rated”
Hooks
“Lifting Angle”