Storing – Rockwell Automation Receiving, Handling, and Storing Industrial Control Panels User Manual
Page 8
Receiving, Handling, and Storing Industrial Control Panels
8
Rod or Pipe Rollers
With the aid of pinch bars, pipe rolling provides a simple method of moving industrial
control panels on one floor level if there is no significant incline. Refer to Figure Figure 6
Pipe rolling an industrial control panel and follow the procedure outlined below.
1. Carefully ease the shipping platform over the pipes until the pipes support the full
weight of the industrial control panel.
2. Roll the industrial control panel to its designated location. Use extreme caution to
steady the load and prevent it from tipping.
Figure 6 Pipe rolling an industrial control panel
Storing
If it is necessary to store the industrial control panel for any length of time, consult the
factory for special instructions.