Rockwell Automation 1404-M4_M5_M6_M8 Powermonitor 3000 Master Module Installation Instructions - Manual (Page 9)

Powermonitor 3000 Master Module 9
Publication 1404-IN007F-EN-P - November 2009
Powermonitor 3000 Display Module
The display module is an optional user-interface device. The display module provides the
most economical and simplest method for setting up and configuring the master module for
operation.
The display module has a highly visible, two-line LED display and four operator buttons with
tactile feedback. Use the buttons and display to navigate through a series of menus for
configuration, commands, and data display.
The display module is shipped with a 3 m (10 ft) long, shielded four-pair cable that provides
power and serial communication between the master module and the display module. The
display module fits into a standard ANSI four-inch analog meter cutout for panel mounting.
Only one display module may be connected to a master module, although you may use one
display module to configure and monitor any number of master modules; one at a time.
Display Module