Rockwell Automation 1772-MJ DATA MINI-PLC-2 FAM.PROG.CONTR - Manual (Page 6)

Step
1
Publication 1772Ć10.2 - March 1996
Configure and Ground I/O
Chassis
Configure I/O Chassis
Set the backplane switches.
a
Switch
Group
Assembly
See the installation manual for your particular processor
for specific switchĆsetting information.
Install keying bands.
See the appropriate product data for the module
you are installing to determine the proper keying
positions for each module.
24
68
10
12
14
16
18
20
22
24
26
28
30
32
34
36
Keying
Bands
Backplane
Socket
10170-I
b
Insert two keying bands in the top backplane connectors of
the I/O chassis. For the processor, place one keying band
in the leftĆmost slot between pins 46 and 48 and 54 and 56.