Rockwell Automation 1732D-IB161212D DNet ArmorBlock Network Powered 16-input Module, Series A, IN User Manual
Page 10
10 DeviceNet ArmorBlock Network Powered 16-input Module, Series A
Publication
1732D-IN012A-EN-E - May 2009
Refer to publication
for Rockwell Automation cable and cord
set offerings or access the Connection Systems website at
.
ATTENTION
If any I/O devices connected to this equipment require Class 2 power to
operate, this equipment and all connected I/O must be powered by a Class 2
source.
To comply with the CE Low Voltage Directive (LVD), this equipment and all
connected I/O must be powered from a source compliant with the following:
Safety Extra Low Voltage (SELV) or Protected Extra Low Voltage (PELV).
ATTENTION
Make sure all connectors and caps are securely tightened to properly seal the
connections against leaks and maintain IP enclosure type requirements.