Rockwell Automation 1746-BTM Barrel Temperature Control Module Installation Instructions - Manual (Page 3)

Barrel Temperature Control Module 3
Publication 1746-IN020B-EN-P - July 2002
Prevent Electrostatic Discharge
ATTENTION
!
Environment and Enclosure
This equipment is intended for use in a Pollution Degree 2 industrial
environment, in overvoltage Category II applications (as defined in IEC
publication 60664-1), at altitudes up to 2000 meters without derating.
This equipment is considered Group 1, Class A industrial equipment
according to IEC/CISPR Publication 11. Without appropriate
precautions, there may be potential difficulties ensuring electromagnetic
compatibility in other environments due to conducted as well as radiated
disturbance.
This equipment is supplied as "open type" equipment. It must be
mounted within an enclosure that is suitably designed for those specific
environmental conditions that will be present and appropriately designed
to prevent personal injury resulting from accessibility to live parts. The
interior of the enclosure must be accessible only by the use of a tool.
Subsequent sections of this publication may contain additional
information regarding specific enclosure type ratings that are required to
comply with certain product safety certifications.
See NEMA Standards publication 250 and IEC publication 60529, as
applicable, for explanations of the degrees of protection provided by
different types of enclosure. Also, see the appropriate sections in this
publication, as well as the Allen-Bradley publication 1770-4.1 ("Industrial
Automation Wiring and Grounding Guidelines"), for additional
installation requirements pertaining to this equipment.
ATTENTION
!
This equipment is sensitive to electrostatic discharge which can cause
internal damage and affect normal operation. Follow these guidelines
when you handle this equipment:
• touch a grounded object to discharge potential static
• wear an approved grounding wrist strap
• do not touch connectors or pins on component boards
• do not touch circuit components inside the equipment
• if available, use a static-safe workstation
• when not in use, store the equipment in appropriate static-safe
packaging