Rockwell Automation 1734D-IB8XOB8 POINT I/O Installation Instructions - Manual (Page 6)

6 POINTBlock dc 8 Input/8 Output Module
Publication 1734-IN020A-EN-P - July 2001
Latch Mode Functionality
To reset an output, the reset bit for the output can be set, or the output bit
must be cycled off/on.
Auto Retry Mode Functionality
In auto retry, the output will recover once the fault is removed.
DeviceNet Connector Wiring
State Indication Error Bit
Off Dark 0
On Yellow 0
Faulted/On Red 1
Faulted/Off Flashing Red 1
State Indication Error Bit
Off Dark 0
On Yellow 0
Faulted/On Red 1
Faulted/Off Flashing Red 1
DeviceNet
connection
Red
White
Bare
Blue
Black
-V 42132
+V
CAN - High
Shield
CAN - Low