Rockwell Automation 1734D-1B8XOW8S 8 Input/8 Relay Output Module Installation Instructions - Manual (Page 15)

POINTBlock dc 8 Input/8 Relay Output Module 15
Publication 1734-IN021C-EN-P - September 2006
DeviceNet Connector Wiring
Specifications
IMPORTANT
When connecting more than one wire in a termination point,
make sure that both wires are the same gauge and type.
POINTBlock dc 8 Input/8 Relay Output Module - 1734D-IB8XOW8,
1734D-IB8XOW8S
Attribute Value
POINTBus Output Current 1 A max @ 5V dc output
DeviceNet Current
(1) 95 mA max for POINTBlock
Number of POINT I/O
Expansion Modules 12 max at expansion port
Isolation Voltage 120V (continuous), Reinforced Insulation Type
1250V rms or 2121V dc for 1 s between ac circuits and
DeviceNet network
Indicators 1 red/green module status indicator
1 red/green network status indicator
16 I/O status indicators (8 input/8 relay output)
Power Dissipation 2.0 W max @ 24V dc
Power Consumption 8.2 W max @ 24V dc
DeviceNet
Connection
Red
White
Bare
Blue
Black
-V 42132
+V
CAN - High
Shield
CAN - Low