Rockwell Automation 1734-EPAC POINT I/O ac Power Supply - Manual (Page 4)

4 POINT I/O 120/240V ac Expansion Power Supply
Publication 1734-IN017A-EN-P - December 2005
Before You Begin
Read this manual for information about how to install the 1734-EPAC
POINT I/O 120/240V ac Expansion Power Supply.
Identify the Components
Use the figure to identify the external features of the ac expansion power
supply.
ATTENTION
Preventing Electrostatic Discharge
T his equipment is sensitive to electrostatic discharge, which can
cause internal damage and affect normal operation. Follow these
guidelines when you handle this equipment:
•
Touch a grounded object to discharge potential static.
•
Wear an approved grounding wriststrap.
•
Do not touch connectors or pins on component boards.
•
Do not touch circuit components inside the equipment.
• Use a static-safe workstation, if available.
• Store the equipment in appropriate static-safe packaging
when not in use.