Rockwell Automation 1756-BATM ControlLogix Battery Module Installation Instructions - Manual (Page 11)

ControlLogix® Battery Module 11
Publication 1756-IN576B-EN-P - September 2003
Mount the Battery Module Directly to a Panel
To mount the battery module directly to a panel:
• Drill the Mounting Holes
• Mount the Battery Module
Drill the Mounting Holes
1. Are you installing the battery module above existing components?
2. On the panel of the enclosure, mark the holes for the mounting tabs
of the battery module. Use the template on page 25.
3. Drill the holes for the mounting tabs.
If: Then:
Yes Protect the existing components from metal chips that may fall as
you drill the mounting holes.
No Go to step 2.
31301-M