Rockwell Automation 1756-BATM ControlLogix Battery Module Installation Instructions - Manual (Page 14)

14 ControlLogix® Battery Module
Publication 1756-IN576B-EN-P - September 2003
Attach the Cable to the Controller
1. Is a 1756-BA1 battery connected to the controller?
!
WARNING
An electrical arc can occur when you:
• connect or disconnect the battery
• connect or disconnect the battery module from
the controller
This could cause an explosion in hazardous location
installations. Be sure that power is removed or the area
is nonhazardous before proceeding.
For Safety information on the handling of lithium
batteries, including handling and disposal of leaking
batteries, see Guidelines for Handling Lithium
Batteries, publication AG 5-4.
If: Then:
Yes Go to step 2.
No Go to step 3
42964
2. Disconnect the 1756-BA1
battery.