Rockwell Automation 1738-OE4CM12 ArmorPoint 4-Channel 24V dc Analog Output Modules, Series A - Manual (Page 6)

6 ArmorPoint 4-Channel 24V dc Analog Output Modules, Series A
Publication 1738-IN025C-EN-P - March 2010
Mounting base
Install the Module
Follow the instructions to install the analog output module.
1. Using a bladed screwdriver, rotate the keyswitch on the mounting base
clockwise until the number 4 aligns with the notch in the base.
2. Position the module vertically above the mounting base.
The module bridges two bases.
Ground lug connection
Latching mechanism
Set to keyswitch
position to 4 for the
1738 analog output
modules 43675