Rockwell Automation 1746-Ax SLC 500 Modular Chassis/ Instructions - Manual (Page 5)

SLC 500™ Modular Chassis 5
Publication 1746-IN016C-MU-P - December 2003
Prepare for Installation
Make sure you have these items.
M4 or M5 (#10 or #12) Hardware
•
phillips screw and star washer (or SEM screw — phillips screw with attached
star washer) for chassis mounting tabs
•
phillips screwdriver
•
drill
Documentation
For your:
•
processor or I/O adapter module
•
power supply
•
communication modules and/or I/O modules
Installation Note
The power supply support panel (left end panel) has screws as indicated in the
illustration below. The center and right end panels are held in position by a molded
latch and do not require screws.
This chassis: Has:
1746-A4 4 mounting tabs
1746-A7 4 mounting tabs
1746-A10 6 mounting tabs
1746-A13 8 mounting tabs
screw
screw
latch
latch
latch
latch