Rockwell Automation 1797-TB3S FLEX Ex Terminal Base - Manual (Page 6)

6 FLEX Ex Terminal Base Units
Publication 1797-5.1 - June 2010
Electrostatic Charge
Protect the system against electrostatic charge. Post a sign near this module:
WARNING Avoid electrostatic charging.
ADVERTÊNCIA! PREVENIR CONTRA O ACÚMULO DE CARGA
ELETROSTÁTICA.
For your convenience, a sign that can be cut out and posted is included in this
installation instruction.
European Community Directive Compliance
If these products have the CE mark they are approved for installation within
the European Community or EEA regions. They have been designed and
tested to meet the following directives.
EMC Directive
These products are tested to meet the Council Directive 2004/108/EC by
applying the following standards:
 EN 61000-6-4:2007, Electromagnetic Compatibility (EMC) - Part 6-4:
Generic Standard for Industrial Environments (Class A)
 EN 61000-6-2:2005, Electromagnetic Compatibility (EMC) - Part 6-2:
Generic Standards - Immunity for Industrial Environments
 EN61326-1:2006 (Industrial), Electrical Equipment For
Measurement, Control, and Laboratory Use - Industrial EMC
Requirements
ATEX Directive
These products are tested in conjunction with associated I/O modules to
meet the Council Directive 94/9/EC (ATEX) Equipment and Protective
Systems Intended for Use in Potentially Explosive Atmospheres by applying
the following standards:
 EN60079-11:2007, Explosive atmospheres - Part 11 : equipment
protection by intrinsic safety "i"
 EN60079-0:2006, Electrical apparatus for explosive gas atmospheres -
Part 0 : general requirements