Rockwell Automation 2361 Power Fuse Replacement - Manual (Page 4)

Lexan is a trademark of General Electric Corp.
Publication 2361-5.15 - May 1998 P/N 185415
 1998 Rockwell International. All Rights Reserved. Printed in USA
Installing Power Fuses 1. Place the left fuse with its label upright and the black indicator on the
left side.
2. Secure the fuse with its two mounting bolts.
3. Place the right fuse with its label upright and the black indicator on the
right side.
4. Secure the fuse with its two mounting bolts.
5. Torque all bolts to 25 lb-ft.
Concluding Steps After installing the power fuses, replace all Lexan shielding and secure the
bay door. Dispose of old parts according to your company procedures and
local ordinances.