Rockwell Automation 1799ER-IQ10XOQ10 Dual-Port EtherNet Embedded I/O Board with 10 Inputs/ Outputs User Manual
Page 11
Dual-Port EtherNet Embedded I/O Board with 10 Inputs/ 10 Outputs 11
Publication 1799ER-IN001B-EN-P - May 2013
Each universal output can be configured via a dip switch for sinking or sourcing output.
Wire each output in accordance with your selected configuration. Default dip switch
settings are at sinking output. Configure the switches before power-up.
Connect the Field Input Device to the I/O Connector (P4)
The 1799ER-IQ10XOQ10 board has universal inputs that allow operation with either
sourcing or sinking input devices. The universal feature lets you configure the inputs as
either sinking or sourcing.
ATTENTION: Do not wire more than 2 conductors on any single terminal.
IMPORTANT
All field input devices must be of the same type, either sinking or sourcing.
The board will not operate if the types are mixed.
OUT
SOURCE
O N
OUT
SINK
10
9
8
7
6
5
4
3
2
1
45083