Attention: avoid electrostatic charge – Rockwell Automation 1797-TCAP ControlNet Ex Tap Dummy Load Installation User Manual
Page 7
ControlNet Ex Tap Terminator Installation Instructions
7
1797-5.30 - September 1999
This product is intended for use in an industrial environment.
Ex Directive
This product is tested to meet the Council Directive 94/9 EC (ATEX 100a)
Equipment and Protective Systems Intended for Use in Potentially
Explosive Atmospheres by applying the following standards:
•
EN50014:1992, Electrical Apparatus for Potentially Explosive
Atmospheres
•
EN50020:1994, Electrical Apparatus for Potentially Explosive
Atmospheres - Intrinsic Safety “i”
•
EN50039:1980, Electrical Apparatus for Potentially Explosive
Atmospheres - Intrinsically Safe Electrical Systems “i”
•
pr EN50284:1997, Special requirements for construction, test, and
marking of electrical apparatus of equipment group II, category 1 G
Important: For detailed certification information, refer to the FLEX Ex
System Certification Reference Manual, publication
1797-6.5.6.
Attention: Avoid electrostatic charge.