Rockwell Automation 1797-TPYS ControlNet Coax Taps - Manual (Page 4)

4
Publication 1797-5.18 - July 2006
Parts List
Before you discard the tap kit packaging, verify that you have all of the parts.
The following parts are included in each ControlNet Coaxial Tap Kit.
Your ControlNet Coax Tap Kit should contain all of these parts.
– One tap (1786-TPR, 1786-TPS, 1786-TPYR, or 1786-TPYS)
– One universal mounting bracket
– One transition plate
– Two BNC connector kits
– Two self-taping screws
– Two threaded screws
– One Ex insulator kit containing instrinsically safe sheaths and dust caps
If you are missing any part, contact your Rockwell Automation Sales
Representative.
Additional Parts (Not Included)
Depending on the type of tap mount and installation you choose, you may require
additional parts not included with this tap kit. The list below describes additional
parts that may be required for your tap installation.
• DIN rail, 35 x 7.5 mm (EN50022 - 35 x 7.5)
• DIN rail, 35 x 15 mm (EN 50022 - 35 x 15)
• screws of various lengths
• tie wrap
IMPORTANT
Use of the light-blue intrinsically safe sheaths and dust caps
included in the Ex insulator kit is required for instrinsically-safe
system certification by certification agencies.
BNC Connector Kits
Tap Body
Universal Mounting Bracket
Transition Plate
Removable Dust Cap Threaded Screws
31641
Self-Taping Screws
Ex Insulator Kit