Rockwell Automation 2090 Low Profile Connector Kits Install Instructions - Manual (Page 3)

Low-profile Connector Kits 3
Rockwell Automation Publication 2094-IN007D-EN-P - August 2010
Catalog Number 2090-K6CK-D15MF
Refer to your drive user manual for information on wiring the connector kit.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0
S
16
17
Pin 1
Pin 10
Pin 5
Pin 11
Pin 6
Pin 15
Tie Wrap
Exposed Braid Under Clamp
Turn clamp over to hold small
wires secure.
Mounting Screws
Shrink-wrapped Insulation
Thermal Switch Wire
15-Pin (male)
Motor Feedback Connector
Thermal Switch Terminals
Follow these steps to form a
compact connection.
1. Push the insulation
down-and-over itself.
2. Move the insulation so it butts
against the outside wall of cover.
3. Tape or shrink-wrap the end of
the insulation to the cable.