Catalog number 2090-k6ck-d26m – Rockwell Automation 2090 Low Profile Connector Kits Install Instructions User Manual
Page 4
Rockwell Automation Publication 2094-IN007D-EN-P - August 2010
PN-78141
Supersedes Publication 2094-IN007C-EN-P - July 2004
Copyright © 2010 Rockwell Automation, Inc. All rights reserved. Printed in the U.S.A.
Allen-Bradley, Rockwell Automation, and Rockwell Software are trademarks of Rockwell Automation, Inc.
Trademarks not belonging to Rockwell Automation are property of their respective companies.
Rockwell Otomasyon Ticaret A.Ş., Kar Plaza İş Merkezi E Blok Kat:6 34752 İçerenköy, İstanbul, Tel: +90 (216) 5698400
Catalog Number 2090-K6CK-D26M
Refer to your drive user manual for information on wiring the connector kit.
Pin 1
Pin 18
Pin 9
Pin 19
Pin 10
Pin 26
Tie Wrap Slots
Exposed Braid Under Clamp
Turn clamp over to hold small
wires secure.
Mounting Screws
Three-conductor I/O Cables (2)
Discrete I/O Wire
Shrink-wrapped Insulation
26-Pin (male)
User I/O (IOD) Connector
Follow these steps to form a compact
connection.
1. Push the insulation
down-and-over itself.
2. Move the insulation so it butts
against the outside wall of cover.
3. Tape or shrink-wrap the end of the
insulation to the cable.