Rockwell Automation 1440-TB-B XM-941 Speed/Position Terminal Base - Manual (Page 17)

XM-941 Speed/Position Terminal Base 17
Publication GMSI10-IN021A-EN-P - May 2010
1 T erminals are internally connected and isolated from the Chassis terminals.
IMPORTANT
The DeviceNet power circuit through the XM module interconnect, whichis
rated at only 300mA, is not intended or designed to power DeviceNet loads.
Doing so could damage the module or terminal base.
To preclude this possibility, even unintentionally, it is recommended that
DeviceNet V+ be left unconnected.