BOXLIGHT MP-25t - Manual (Page 20)

– 20 –
!5
COMPUTER INPUT-1 TERMINAL
Used to connect a computer to the projector.
!6
COMPUTER INPUT-2 TERMINAL
Used to connect a computer to the projector.
!7
MONITOR OUTPUT TERMINAL
Used to connect a monitor to the projector.
!8
COMPUTER AUDIO INPUT-1 JACK
mini stereo type
Used to connect a computer audio input to the
projector.
!9
CONTROL PORT-1 CONNECTOR
Used to connect a mouse cable to the projector.
@0
COMPUTER AUDIO INPUT-2 JACK
mini stereo type
Used to connect a computer audio input to the
projector.
@1
CONTROL PORT-2 CONNECTOR (SERIAL PORT)
Used to connect a mouse cable to the projector.
NOTE: Control port-2 connector can be also used
as serial port.
@2
AUDIO INPUT JACKS
Used to connect an audio input to the projector.
@3
VIDEO INPUT JACK
Used to connect a video source to the projector.
@4
S-VIDEO INPUT JACK
Used to connect a S-VHS video source to the projector.
@5
AUDIO MONITOR OUTPUT JACKS
Permits audio connection to a monitor.
@6
VIDEO MONITOR OUTPUT JACK
Permits video connection to a monitor.
@7
EXT. SP. JACK (3.5 mm mini stereo type)
Used to connect an external speaker system.
COMPUTER IN 1 COMPUTER IN 2 MONITOR OUT
EXT. SP CONTROL PORT 2 CONTROL PORT 1 AUDIO 2
(STEREO) (STEREO)
AUDIO 1
(STEREO)
(8 Ω)
AV IN
AUDIO VIDEO VIDEO S-VIDEO (MONO)
MONITOR OUT
R L AUDIO R L
!9
@2
!8
!5 !6 !7
@0
@1
@7
@3 @4 @5 @6
REAR OF THE PROJECTOR