BOXLIGHT MP-25t - Manual (Page 7)

– 7 –
DESCRIPTION
SPEAKERS
INFRARED
REMOTE
RECEIVER
PROJECTION LENS
FEET LOCK BUTTON
FEET LOCK
BUTTON REMOVABLE
LENS COVER
INFRARED
REMOTE
RECEIVER
MAIN ON/OFF
SWITCH
CARRYING
HANDLE
POWER CORD
CONNECTOR
LAMP COVER
ADJUSTABLE
FEET
AIR INTAKE VENT
AIR INTAKE
VENT
FRONT
REAR
EXHAUST VENT
CAUTION HOT AIR !
Air blown from the exhaust vent is hot.
Observe the following when handling your
projector or choosing a location to install it.
¡ Keep heat-sensitive objects away from the
exhaust port.
¡ If you set the projector on top of a metallic
surface, the surface will become hot because
of the hot air exhaust. Be careful when
handling.
¡ Do not touch the cabinet near to the exhaust
vent area, and especially screws and metallic
parts. These parts will become hot while the
projector is used.
BOTTOM