BT Studio Twin - Manual (Page 14)

13
BT Freelance XD ~ 3rd Edition ~ 2nd August ’02 ~ 4832
Warning
Under no circumstances should NiCad or non-rechargeable
batteries be used. Only use the approved batteries. Using
unapproved batteries will invalidate your guarantee and
may damage the telephone.
IMPORTANT
The handset must always be placed on the base
face up. The base must be plugged into the
mains power socket at all times.
4
Charge the handset batteries for at
least 16 hours
Before you use your BT Freelance XD 100 for the
first time it is important to have the handset
batteries fully charged. Place the handset on the
base. You will hear a long beep. The red charging
light on the base will come on and the battery and
charging icon
will be displayed. Leave the
handset to charge continuously for at least 16
hours to reach full charge.
The handset comes pre-registered but the icon
will flash to indicate that the handset is linking
up with the base. Once link up is successful the
icon will stop flashing and remain steady.
Once the handset is fully charged, the charging
icon
will be switched off.
The charging light will remain red even when the
batteries are fully charged.