Billion Electric Company BIPAC-2AB 2.0 - Manual (Page 14)

BIPAC-2AB 2.0 User’s Manual
10
Call
Waiting
If you have an active call and the Call Waiting function is
enabled, you will hear two tones when there is another incoming
call. You can switch between the two calls by using the
Hold/Retrieve function (* # ).
Internal
Call
Transfer
To transfer a call to the other analog port of the ISDN TA, you
can first put the call on hold by pressing:
* #
Then, make an internal call with the following command:
#
After you put the telephone handset on-hook (hang up), the call
will be transferred to the other port.
Suspend/
Resume
For two or more ISDN devices (for example, one ISDN a/b
adaptor and one ISDN phone) connected to your ISDN line, you
can suspend a call on one device (ISDN a/b adaptor) and resume
the call on the other (ISDN phone).
To suspend a call with the analog telephone connected to the
ISDN a/b adaptor, enter this command:
** Call ID #
Call ID is not required or any number up to 8 digits.
You can resume the suspended call when you use the command
with the same Call ID.
Example: If you receive a call in the living room and want to
continue it in another room, use this combination
** 12345 #
in the living room and hang up. Go to the other room and enter
the command again:
** 12345 #
your call is resumed.