Billion Electric Company BIPAC-2AB 2.0 - Manual (Page 9)

Chapter 2 Using BIPAC-2AB 2.0
5
F IGURE 2: C ONNECTING THE BIPAC-2AB 2.0
4. The BIPAC-2AB 2.0 ISDN a/b adaptor will run a Power-On self-
diagnostic test. The LEDs on the front panel will blink on and off
one by one and the connected analog telephones will ring.
The Front Panel LEDs
The following illustration and table describe the front panel LEDs:
F IGURE 3: T HE F RONT P ANEL LED S
LED Meaning
PWR When lit it indicates AC power is connected.
RUN Flashes periodically to indicate that the BIPAC-2AB 2.0
is working properly.
ISDN When lit it indicates that the ISDN S0 bus is activated.
B1
When lit it indicates that the ISDN “B1” channel is
being accessed. It will flash during data transfer.
B2 When lit it indicates that the ISDN “B2” channel is
being accessed. It will flash during data transfer.
When lit it indicates that the analog device connected to
the Phone 1 port is in use.
When lit it indicates that the analog device connected to
the Phone 2 port is in use.