BT PARAGON 500 - Manual (Page 47)

BT Paragon 500 – Edition 4 – 10.05.04 – 5840
No display
Is the phone connected in to the mains power and
switched on at the plug.
No dial tone
Check that the telephone line cord is plugged into the
phone socket.
Check that the phone is connected to the mains power
and switched on.
Dial tone, but phone will not dial out
If connected to a switchboard/PBX, you may not have set
the dialling access code, see page 59.
No ring
Check that the ringer volume is switched on, see page 17.
Check that VIP is switched off, see page 25.
No Phonebook name and number stored
You must store both the number and the name when
adding a new Phonebook entry, see page 20.
Help
47
ºVIP set to ON will only ring if the
caller’s number is matched with
one in your directory AND a ring
tone is assigned (not the default).
5840 Paragon 500 SMS UG [3] 10/5/04 5:14 pm Page 47