Network screen – AJA Ki Pro Mini User Manual
Page 75
KiPro Mini v4.2
www.aja.com
75
Network Screen
This screen contains all of the information required to set up Ki Pro Mini TCP/IP
networking. The screen also shows all Ki Pro Minis that are on the same LAN as the Ki Pro
Mini the web browser is currently communicating with.
NOTE:
Ki Pro Mini IP Address and netmask fields filter keystrokes and only allow legal characters. The
Ki Pro Mini also checks the format of the entry to ensure it is valid; if found to be invalid, the
background of the IP Address or netmask will turn red. If you click the Update button while an
invalid entry exists in one of the these fields, Ki Pro Mini will display an error dialog—you must
correct the error before updating.
Figure 23. Ki Pro Mini Web Interface, Network Screen
MAC Address (50.6):
Enter the Media Access Control address of the network. A MAC address is also known as a
hardware address or physical address and uniquely identifies the ethernet network
adapter on the LAN.
IP Address Type (50.1):
Use to change the IP address for Ki Pro Mini. When an IP address is entered and the Apply
button is clicked, the IP address will change and the browser will display a “redirecting
to...” page which should send the browser to the new IP address entered. (You can also
click on a link on the redirect page.
IP Address (50.2):
Enter an IP address compatible with your LAN (if you have one). When networking Ki Pro
Mini to a computer, this is the IP address that you’ll enter in the computer’s web browser
to bring up the Ki Pro Mini’s web interface from its embedded web server. You must also
click the “Apply” button to update Ki Pro Mini with the IP address entered here.
Netmask (50.3):
Enter a subnet mask compatible with your LAN (if you have one). You must also click the
“Apply” button to update Ki Pro Mini with the changed information entered here.
Default Gateway (50.4):
Enter the IP address for your LAN’s gateway/router (if you have one). You must also click
the “Apply” button to update Ki Pro Mini with the changed information entered here.
Update Network Settings:
Pressing this button requests Ki Pro Mini to update its IP information with that entered on
this screen.