Input tab screen, Input video selections – AJA 4K2HD User Manual
Page 13
4K2HD v1.7
www.aja.com
13
Any parameter changes you make are immediately implemented and are saved,
overwriting previous settings.
Input Tab Screen
Click on the Input tab to view and make changes to the converter’s input settings.
Figure 7. MiniConfig, Input Tab Screen
Input Video Selections
Video Source:
Selects the input video format. Choose from the following:
• Auto - automatically selects the format based on the input video parameters.
• 4xSDI 4K
• 2xSDI 4K - (3G-B Dual Stream input required)
• 2xSDI HD-DL - (2 wire SMTPE 372)
• SDI 1, SDI 2, SDI 3, or SDI 4
NOTE:
One of the 4 incoming quadrants of 4K video can be shown full screen on the HDMI/SDI
outputs. This is accomplished by selecting one of the 4 SDI inputs, but requires that all 4 SDI
inputs are connected.
Color Space:
Selects the Input Video Color Space. Choose Auto, 422 YCbCr, 444 RGB, or 444 YCbCr.
Choosing “Auto” will automatically select color mode based on the input video
parameters and the payload ID.
RGB Range:
Selects the Input Video Color Range. Choose SMPTE (default) or Full color range. There is
no auto detection for color range.
Bit Depth:
Selects the input video bit depth. Choose Auto, 8-bit, 10-bit, or 12-bit. Choosing “Auto”
automatically selects the bit depth based on the input video parameters and the payload
ID.