AJA 4K2HD - Manual (Page 15)

4K2HD v1.7 www.aja.com 15
SDI Out
Passthrough: Choose Auto, Off, or On (default is Auto). This setting can be used with HD or 2K psf
format input signals. When On, psf format will passthrough to the SDI output instead of
the converted, progressive format signal.
3Gb Mode: Choose Auto, 3G-A, or 3G-B (default is Auto).
HDMI Tab Screen
Click on the HDMI tab to view and make changes to the 4K2HD HDMI output settings.
Figure 9. MiniConfig, HDMI Tab Screen
Color Space: Selects the desired output video format. Choose from the following:
• Auto - selects the video format based on the input video and the attached device's
capabilities (default setting).
• 4:2:2 YCbCr (cannot exceed 10-bit depth)
• 4:4:4 RGB
• 4:4:4 YCbCr
Bit Depth: Choose from Auto, 8-bit, or 10-bit (see limitations above). Choosing “Auto” automatically
selects the bit depth based on the input video and the attached device's capabilities.
RGB Range: Choose Auto, SMPTE or Full. Choosing “Auto” automatically selects the input color range
setting.
Color Dithering: Choose Off or On. Default is Off.
HDMI/DVI: Choose Auto, HDMI, or DVI. When DVI is selected, any audio signals present are not
passed. Choosing “Auto” automatically selects the output mode based on the attached
device's capabilities. Default is Auto.