Block diagram, I/o connections, User controls – AJA V2Digital User Manual
Page 5: Block diagram i/o connections user controls, Block diagram i/o connections, V2digital, side view
V2Digital v1.0
www.aja.com
5
Block Diagram
I/O Connections
Figure 1.
V2Digital, Side View
User Controls
The V2Digital converter has two user interfaces:
• DIP switch settings
• MiniConfig via USB
The DIP switch 1 setting determines which configuration parameters the converter will
use. When Off the unit is set to Local, DIP switches 2-4 will be active. When On the unit is
set to Remote and will use the MiniConfig settings. MiniConfig settings are non-volatile
and are retained through power cycles.
NOTE:
The Beta-J parameter is not available through the DIP switch interface. Use MiniConfig if you
need to use the Beta-J format.
DIP
Switch
User
Interface
for
Feature
Selection
10-bit A/D
Converter
Genlock
Anti-
Alias
Filter
SD/HD
Serial Video Out
Analog
Component/Composite
Inputs
CMPST
B
G
R
Y
Y
Pb
C
Pr
Y/G
Clocks
Pb/B
Pr/R
USB Bus for MiniConfig
(connect to PC or Mac)
Control
HD/SD SDI
+ 5VDC
Analog
Input BNCs
Configuration
determined by
DIP switch or
MiniConfig
Power
Input
Output BNC
USB
Power
LED