Antelope Audio DA Distribution Amplifier - Manual (Page 3)

Front Panel
Power Switch
Source Selector
Designates which input receives the clock distributed to the DA outputs.
Lock and Signal LEDs
When the Signal LED is lit, it verifies that the input chosen by the Source Selector is
receiving clock. The Lock LED verifies that the DA is properly locked to the incoming
clock, and the incoming clock is at a supported frequency (30 kHz- 202 kHz).
Frequency Display
Displays the sample rate received & distributed by the DA.
Contrast Knob
Adjusts the frequency display contrast.
1
2
3
4
5
1 2 3 4 5 6 6
Front Panel