Autocue SSP10 Portable - Manual

SSP10
Guide
It is important that the camera lens is in the centre of
the aperture at the rear of the hood. This is achieved
by raising and lowering the camera mounting plate
and hood.
Camera Fixing
Fix the camera in place
using the camera screw
provided.
1/4” BSW
Connect the power supply
and the VGA or video cable.
Power Supply
Alternative Configuration
The SSP 10” monitor can be reconfigured to
straight read mode. To achieve this remove the
hood unit by loosening the two thumb screws of
the monitor mount and move the monitor to the
vertical position. Remove the monitor from the
bracket by removing the 4 screws and refit the
monitor in the correct orientation .
iPad Adaptor
autocue.com
By replacing the 10”
display with the iPad
adaptor it is possible to
mount an iPad 1 or 2
and use this as the
prompting display.
VGA Cable
iPad adaptor
Correct monitor
orientation for
straight read
Camera Screw
Monitor