Autocue QPro User Guide - Manual (Page 41)

QPro User Guide HM.docx 2011-07-14
41 © 2003-2011 Autocue Group Ltd.
Update scroll rate setting
Select a scroll value.
In the field next to the Update button, enter a new scroll rate. Click the Update button. The new
scroll rate is displayed for the scroll value. To save the scroll rates as a profile
Click the Save As Profile button. Enter a profile name in the Profile Name field. Click OK.
Once the profile is saved, you can then load it again the next time you
wish to use the settings in the profile. You can do this by clicking the Load
button and selecting the profile from the dialogue box. It is also possible
to use a profile created for an Autocue Serial Multibutton scroll controller.
Contour Design Controllers
ShuttlePro
The controller is designed for one-hand access to the buttons and jog/shuttle knob. The
inner 'jog' control rotates through 360 degrees and provides precision forward and
reverse scrolling. The outer black ring or 'shuttle' is rubberized and spring-loaded. The
controller is connected via a USB port.
The ShuttlePRO has 15 fully programmable buttons, nine of which have removable key caps
for easy labelling and referencing.