Balboa Water Group Dolphin II CE - Manual (Page 5)

5
Press POWER once to turn on or off the selected
home entertainment component.
The LED (red light) blinks to show that the remote
control is working and is sending signals.
Use SETUP for all programming sequences.
Press TV, VCR/DVD, CBL/SAT, RCVR, SPA, or CD
once to select a home entertainment component
to control.
See next page for descriptions of the buttons in
this circular area of the remote.
Use volume + (or volume -) to raise (or lower)
the sound volume.
Use CH + (or CH -) to select the next higher (or
lower) channel.
Press MUTE once to turn sound off or on.
Press LAST once to recall the last channel and to
page back one screen in the main menu.
Use these buttons to control available spa functions.
(Depending on your spa, some buttons may
control other equipment than indicated here.)
Use the keypad (0 ~ 9) to directly select channels
(e.g., 09 or 31).
Press MODE once to switch the VCR to view TV
channels or tape. This key will also control the
input select feature on most TVs.
Press ENTER once after entering channel numbers
on some TV models.
In the VCR and TV modes, use the REW, PLAY, FF,
REC, STOP, and PAUSE keys to control your VCR.
To record a program, press REC twice. These keys
are also used for CD and DVD functions.
Continued on next page…