Balboa Water Group Dolphin II CE - Manual (Page 8)

8
PROGRAMMING TV CONTROL
Locate the brand name of your TV in the Setup
Codes For TVs section below, and write it in the
following space.
TV Brand:
The brands are listed in alphabetical order with
the most popular codes listed first. You will use
one of these codes to program the Dolphin to
operate your TV:
1. Turn on the TV.
2. On the Dolphin, press TV once. Press and
hold SETUP until the LED blinks twice, then
release SETUP.
3. Enter the first four-digit code for your TV. If you
perform this procedure correctly, the LED will
blink twice.
NOTE: If the LED did not blink twice after entering
the code’s last digit, repeat steps 2 through 3 and
try entering the same code again.
4. Aim the Dolphin at your TV and press POWER
once. The TV should turn off. If it does not
respond, repeat steps 2-4, trying each code for
your brand until you find one that works. If it
still does not work, try searching for the code
(see Searching For Your Code on page 25).
5. Write your TV code in the boxes below for
future reference.
QQQQ
NOTE: Remember, to use the Dolphin to operate
your TV, press TV first.
Setup Codes for TVs:
Admiral 0463, 0093
Advent 0761, 0842
Aiko 0092
Akai 0702, 0672, 0030, 0812
Albatron 0700
Alfide 0672
America Action 0180
Anam 0180
AOC 0030
Apex Digital 0748, 0765, 0879, 0767
Audinac 0180
Audiovox 0451, 0180, 0092, 0623
Aurora Systems 0801
Baysonic 0180
Bell & Howell 0154
Blaupunkt 0763
Blue Sky 1254
Bradford 0180
Broksonic 0463, 0236
Candle 0030
Carnivale 0030
Carver 0054
Casio 1205