Balboa Water Group Dolphin II Spa Only CE - Manual (Page 5)

5
The LED (red light) blinks to show that the remote
control is working and is sending signals.
Use SETUP for all programming sequences.
Use these buttons to control available
spa functions.
Press LT once to turn on the Spa Light.
Press P1 once to turn on Pump 1.
Press P2 once to turn on Pump 2.
Press P3 once to turn on Pump 3.
Press BL once to turn on the Blower.
Depending on your spa, some buttoms may
control other equipment than indicated here.