Balboa Water Group Dolphin II Spa Only CE - Manual (Page 8)

8
TROUBLESHOOTING
PROBLEM: LED does not blink when you press a key.
SOLUTION: Replace the batteries with two (2) new AA
alkaline batteries (see page 3).
PROBLEM: Dolphin does not control spa. LED blinks
when you press a key, but receiver does
not respond.
SOLUTION: Make sure you are within 15 feet of the spa
and aiming the Dolphin directly at the
receiver.
It is possible that addressing (which is
incompatible with your spa) has been
enabled accidentally. See the Spa
Addressing section for steps on how to
reset the Dolphin. (See page 6.)