BenQ Professional RTS Gaming Monitor RL2450H / RL2450HT - Manual (Page 12)

12 How to assemble your monitor hardware (RL2450H)
How to detach the stand base
1. Prepare the monitor and area.
Turn off the monitor and the power before unplugging
the power cable. Turn off the computer before
unplugging the monitor signal cable.
Protect the monitor and screen by clearing a flat open
area on your desk and placing a soft item like a towel on
the desk for padding, before laying the screen face down
on a flat clean padded surface.
Please be careful to prevent damage to the monitor. Placing
the screen surface on an object like a stapler or a mouse will
crack the glass or damage the LCD substrate voiding your
warranty. Sliding or scraping the monitor around on your
desk will scratch or damage the monitor surround and
controls.
2. Push the locking clips upward to detach the
monitor base from the monitor stand arm.
While pushing the locking clips upward, detach the
stand base from the stand arm.
3. Remove the monitor stand.
Insert a pointed object such as a screwdriver to the
hole above the monitor stand arm, and then push
the screwdriver against the release button inside
the hole. Then pull the monitor stand backward
away from the monitor.
1
2
1
2
Release
button