BenQ AWL-100 - Manual (Page 16)

BENQ Corporation 12
3.3 Encryption
According to WEP function select, this page allows the entry of four keys for 64-bit
and 128-bit encryption. Each key must consist of hex digits to be written to the
driver and registry. This means that only digit number 0-9 and letters A-F are valid
entries. Therefore, if entered incorrectly, the program will not write keys to a
driver. You can also use Alphanumeric or Passphrase to create keys.
- Key 1 – Key 4
When you want to enter the keys manually, you may use these four fields. If
you wish this node to match keys in a different vendor’s product, this may be
necessary.
- Apply
You may also update the driver with the four keys displayed in Key field by
pressing this button. The keys are also written to the registry for permanent
storage. This button clears all the bytes in the four keys. It’s very useful when
you wish to start over or enter manually.