Bang & Olufsen BeoCord V8000_MS - User Guide - Manual (Page 10)

Switch on BeoCord V 8000 and call up the
V 8000 main menu! See page 7 for further
instruction about calling up on-screen menus…
Press to select SETUP
Press to call up the setup menu
The SETUP menu appears…
Press until TUNING is selected
Press to call up the tuning menu
The TUNING menu appears,
FREQUENCY is lit up already…
Press to start tuning in a TV station
or, use the number keys to key in an
exact frequency
(Pressing STOP stops tuning)
When a desired TV station is
found…
Press to move to the other items in
the menu
Key in a specific number e.g. a
Teletext subtitles page number
Press to reveal the options available
for an item
Fill in or adjust as required…
Press to store your TV station
Press GO to continue tuning…
Press to leave the menus
10
Fine tuning stations
To tune in TV stations, you must call up
the BeoCord V 8000 tuning menu.
When you tune in, make sure that your
TV stations are stored on the same
program numbers in your V 8000 as
they are in your BeoVision MS TV.
59 program numbers are available for
you to store TV stations on.
If necessary, you can fine tune the
station. You can also assign a station
with the Teletext subtitles facility.
On the following page, the items on
the menu are explained in detail…
MENU
TIMER RECORD
SETUP
CAMCORDER
F I N E T U N I N G A N D P R E S E T T I N G
The V 8000 main menu
The setup menu
The menu for tuning in stations
SETUP
ADJUST
OPTIONS
MARKER
TUNING
CLOCK
LINK
then
then
GO
then
then
then
then
then
GO
tt
or
tt
ss
or
then
or
0
9
through
GO
EXIT
TUNING
PROGRAM
FINE
SUBTITLES
10
FREQUENCY 210
0
333
SOUND STEREO