Bang & Olufsen BeoVision 5 - User Guide - Manual (Page 30)

30
Tuning
You can make BeoVision 5 find your
TV stations for you automatically.
During the Add program process,
your previously tuned channels are
left alone. This allows you to keep
channel names, their order in the
channel list, and any special settings
you may have stored for those
channels, such as decoder or broad-
cast system settings.
Find available channels
BeoVision 5 finds TV channels and stores them
by number and name. Up to 99 different TV
channels can be stored.
TV tuning
1 Edit TV list
2 Add program
3 Auto tuning
4 Manual tuning
Freq Pr
210 12
> Press MENU to call up the main menu.
> Press 3 to call up the Setup menu.
> Press GO to call up the Tuning menu.
> Press GO again to call up the TV tuning menu.
> Press 3 to call up the Auto tuning menu. The
Freq (frequency) and Pr (program) fields are
shown.
> Press ▲ to start automatic tuning. The content
of the frequency and program fields will show
tuning progress. Each time a channel is found,
the process pauses shortly and then continues
automatically.
When tuning is completed, you can rearrange,
delete or rename channels from the channel list.
This list also appears if you press STOP during auto
tuning. Refer to the chapter ‘Edit tuned TV
channels’ on pages 32–35 for information about
editing the channel list.