Bang & Olufsen BeoVision 5 - User Guide - Manual (Page 43)

43
Use your PIN-code
Should your BeoVision 5 get disconnected
from the mains for more than approximately
30 minutes, the BeoVision 5 on-screen display
prompts you for the correct PIN-code when
the television is turned on.
Did you forget your PIN-code?
Contact a Bang & Olufsen retailer to receive a
five-digit Master Code.
Press the number keys on Beo4
to enter the code digits
If you enter an incorrect digit at
any time, simply press STOP to
reset the input fields
BeoVision 5 restarts when the
last digit is entered
If an incorrect code is entered,
ERROR is shown in the on-screen
display. Re-enter the code
Five incorrect entries will cause the BeoVision 5 to
shut down for three hours, during which remote
control access is not possible.
PIN _ _ _ _
0 – 9
PIN * * _ _
STOP
PIN _ _ _ _
PIN * * * *
TV 1
ERROR
PIN _ _ _ _
When you have received a Master Code…
Connect your system to the
mains
When BeoVision 5 prompts you
for your PIN-code, press and hold
ss to call up the MASTERCODE
display
Entering this five-digit code via
the number keys will deactivate
your PIN-code and reactivate
BeoVision 5. DELETED is shown
in the BeoVision 5 on-screen
display
To start using your PIN-code again…
Enter a new personal PIN-code
and destroy the slip with your
Master code
PIN _ _ _ _
ss
PIN _ _ _ _ _
0 – 9
DELETED
PIN _ _ _ _