Bang & Olufsen BeoVision Avant (1995-2005) - User Guide - Manual (Page 48)

S P E C I A L V I D E O F U N C T I O N S
48
Tracking Sharpness
+6 0
Adjusting the video picture – tracking
Please note…
Tracking adjustment will be carried out
automatically when a new tape is played. You can
instruct the video tape recorder to carry out such
an automatic tracking adjustment any time during
playback via the Beo4 remote control. In a few
instances, however, a more thorough adjustment
of the picture may be necessary...
Streaks in the picture or noise in the
sound may be due to imprecise
tracking of the video tape. This is seen
most often when you play back prere-
corded tapes or tapes recorded on
another video tape recorder.
You can carry out tracking adjustment
at any time during normal playback.
You can adjust any jitter (vertical
flitter) occurring in a still picture when
the video recorder is paused and the
still picture is on the screen.
To adjust the video picture, you must
call up the V.Tape Adjust menu and
adjust as required.
Menu
1 Timer record
2 Timer play
3 TV list
4 Setup
V.Tape
1 Adjust
2
Basic Setup
Setup
1 Tuning
2 Sound
3 Picture
4 Stand
5 Source
6 Menu
7 Clock
8 V.Tape
The main menu
The Setup menu
The V.Tape access menu
The V.Tape Adjust menu – allows you to adjust
the video picture:
Tracking... can be adjusted within a range
of +/- 18.
Sharpness... can be adjusted within a range of
+/- 3. Adjust settings for S.VHS and VHS v.tapes
separately if the quality of the recording or
playback is poor.
Jitter... can be adjusted within a range of +/- 18.
Jitter only appears on the menu when you have
a still picture on the screen.
Press to call up the main menu
The main menu appears…
Press to call up the Setup menu, if
Sat is available Setup will be item 5
The Setup menu appears...
Press to select item 8, V.Tape
The V.Tape access menu
appears...
Press to call up the V.Tape
Adjust menu
The V.Tape Adjust menu
appears…
Press to adjust as required
Press to move from item to
item in the menu
Press to remove the menu from the
screen
MENU
4
then
8
EXIT
then
GO
then
or
then
or
then
tt
ss