Bang & Olufsen BeoVision Avant CTV (1995-2005) - User Guide User Manual
Page 29
29
PDC/VPS facility and Timer recording…
The PDC/VPS facility in your video tape
recorder enables you to make use of the PDC
(Program Delivery Control) and the VPS
(Video Programming System) broadcasting
signals accompanying programmes in some
countries. The facility can be set to On or Off
via the video tape recorder’s setup menu.
The PDC/VPS facility ensures that a
programme accompanied by the PDC/VPS
signals will be recorded in its full length –
even if the programme is delayed or
prolonged.
If the PDC/VPS facility is set to On and the
PDC/VPS signals or times are provided by the
broadcaster, you must programme the exact
start and stop times of each programme you
wish to record in order for your Timer
recording to be successful. If you wish to
record two programmes in a row, you must
make two separate Timer recordings.
If the PDC/VPS facility is set to Off, recording
will start and stop as you programme, even
if the programme is delayed or prolonged.
So, just programme the start time of the
first programme and the stop time of the
next one to record two programmes in a
row.