Bang & Olufsen BeoVision Avant CTV (1995-2005) - User Guide - Manual (Page 36)

E X T R A V I D E O E Q U I P M E N T
36
Registering extra video equipment
You can connect extra video
equipment to the AV socket* on the
back of the BeoVision Avant.
Any extra video equipment connected
to the sockets must be registered into
the Sources menu. Move to the
equipment displayed under each socket
to reveal the different options and do
not press GO until you have selected
the options matching the equipment
you have connected to all sockets.
*Note: Please refer to the section Expanding your
system, page 12 in the Setting-up guide for
further information about the AV socket.
Note: When you tune in to a TV station via your
decoder number 2, you must set the item Decoder
in the TV tuning menu to 2.
If only one decoder is connected to the BeoVision
Avant connect it to the socket marked Decoder –
not the AV socket.
Menu
1 Timer play
2 TV list
3 Setup
Setup
1 Tuning
2 Sound
3 Picture
4 Stand
5 Sources
6
Menu
7 Clock
The main menu
The Setup menu
Press to call up the main menu
The main menu appears…
Press to call up the Setup menu, if
Sat is available Setup will be item 4
The Setup menu appears…
Press to select item 5, Sources
The AV Sources menu appears...
Press to move between the items in
the menu
Press repeatedly to display the
options for each socket
Once you have selected the right
option for each socket…
Press to register the sources
Press to remove the on-screen menus
MENU
3
5
EXIT
then
GO
then
or
ss
tt