Bang & Olufsen DVB-HD - User Guide - Manual (Page 19)

About Smart Cards …
If you want to watch coded channels,
contact your programme provider. The
programme provider will register you as
an authorised viewer, usually requiring
payment. You will then be provided
with a Smart Card. Note that a Smart
Card is only valid for one programme
provider and therefore only works with
certain channels.
Smart Cards and CA Modules may also
give access to special menus which are
not described here. If this is the case,
follow the instructions from your
programme provider.
In order to view a coded service, you
need to have a valid Smart Card.
Insert a Smart Card carefully into the
CA Module.
You can insert a CONAX Smart Card
directly into the built-in Smart Card
reader.
Contact your Bang & Olufsen retailer for
information about compatible CA Modules.
To place the CA Module and the Smart Card
correctly, refer to the Guides enclosed with
your television.
Smart Cards or CA Modules are distributed
from your programme provider. The cards
must remain in the CA Modules, unless your
programme provider asks you to remove it.
This is important in case your programme
provider wishes to send new information to
your Smart Card.
>> Connections
19
CA Module Smart Card