Bang & Olufsen BeoVision MX_4200 - User Guide - Manual (Page 8)

8
The functions shown on these pages
are used on a daily basis.
Choose a TV program by its number
and switch to another program or
source.
Bring up a list of TV programs on the
screen or adjust the position of the
television, if it is equipped with the
optional motorised wall bracket.
You can also select a program from a
Group of programs you have
created. For further information
about Groups, refer to the chapter
‘Use Groups’ on page 14.
Finally, you can adjust the sound
volume or change sound type or
language.
Watch TV
Select a TV program
When you switch the television on, the last
program viewed appears on the screen.
Press to switch on the television
Press a program number to go
directly to that program
Press to change programs one by
one
Press to switch the television to
standby
Pressing 0 swaps between the
current and previous TV
programs.
Bring up a TV list
All your TV programs appear on a list, which
you can bring up on the screen. The list
contains program numbers and names, and
can contain up to 99 TV programs. You can
also bring up a program list for Groups of
programs.
Press to switch on the television
Press and hold to bring up a TV
list on the screen
To select a program, enter the
program number, or…
…press until the desired program
is highlighted
Press to switch on the chosen
program
Press to leave the menu
Call up the program list for a
specific Group…
Press to switch on the television
Press ss or tt repeatedly to step
through your Groups
Press to bring up the chosen
Group
Press and hold to bring up the
program list for this Group
Press ss or tt to see the program
lists for the other Groups
TV
BBC
GO
0 – 9
▲
▼
GO
EXIT
TV
BBC
ss tt
MY GROUP
GO
GO
ss tt
TV
TV 2
0 – 9
▲
▼
•
NOTE! Set-top box programs are only available if
a set-top box is connected.